Skip to main content

Industrial Engineering (MEng)

Master of Engineering (MEng)

Program overview

The MEng in Industrial Engineering is a course-based program for practicing engineers who want to enhance their knowledge, analytical skills and ability to solve complex technological problems. With an international reputation and world-class research programs, our Department is at the forefront of research and graduate training in Canada. You will have access to state-of-the-art laboratories and established research centres in a department that promotes interdisciplinary research in industrial control, computer-aided vehicle engineering, composites and computational fluid dynamics. This program combines course work with the option to complete one or more projects. Students interested in pursuing a doctorate should apply to the MASc program instead.

Program details

Admission Requirements

  • Bachelor’s degree in engineering or equivalent with high standing.

Additional Admission Requirements

Option I. Engineering Management.

  • Those applicants who are currently employed as engineers must have a minimum two years full-time relevant work experience.
  • Those applicants who are currently not employed must have a minimum of five years work experience as an engineer.

Proficiency in English

Proficiency in English. Applicants whose primary language is not English must demonstrate that their knowledge of English is sufficient to pursue graduate studies in their chosen field. Please refer to the English language proficiency page for further information on requirements and exemptions.

Degree Requirements

The requirements described here are in addition to the general degree requirements for the Master/Magisteriate in Engineering (MEng)

Fully-qualified candidates are required to complete a minimum of 45 credits.

Please see the Engineering Courses page for course descriptions and prerequisites.

Industrial Engineering MEng (45 credits)

45

credits chosen from one of the following options:

 

 Option I: Engineering Management   

 Option II: Lean Systems Engineering   

 Option III. Supply Chain Engineering  

 Option IV. Industrial Optimization and Systems Analytics   

 Option V. Reliability and Maintenance Engineering  

 

If no option is selected, students must follow  Option VI. General Stream  

 

Courses must be selected as shown below.

 

Option I: Engineering Management (45 credits)

20

credits minimum chosen from Industrial Engineering Area Courses:

  INDU 6121 Applied Optimization (4.00)
  INDU 6151 Decision Models in Service Sector (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6241 Lean Manufacturing (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6321 Introduction to Six Sigma (4.00)
  INDU 6391 Reliability and Maintenance for Design and Manufacturing (4.00)
  INSE 6230 Total Quality Project Management (4.00)

3

credits of Management Area Core Courses

  MBA 640 On Ramp (0.00)
  MBA 641 Responsible Manager (3.00)

6

credits minimum chosen from Management Area Elective Courses

  MBA 642 Financial Reporting for Responsible Decision Making (3.00)
  MBA 643 Managerial Analytics (3.00)
  MBA 645 Economics for Organizational Decision Making (3.00)

16

credits Industrial Stage, Project and Report

  INDU 6991 Engineering Management Industrial Stage I (8.00)
  INDU 6992 Engineering Management Industrial Stage II (8.00)

Industrial stages must be completed with a company, governmental organization or a non-government organization (NGO). Students are responsible for finding their projects. An industry supervisor is highly recommended. The course coordinator serves as the main academic supervisor.

Option II: Lean Systems Engineering (45 credits)

24

credits of Industrial Engineering Core Courses:

 

  INDU 6121 Applied Optimization (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6990 Industrial Engineering Capstone (8.00)
‌ 
 

                         
16

credits Area Courses:

 

  INDU 6221 Lean Enterprise (4.00)
  INDU 6241 Lean Manufacturing (4.00)
  INDU 6321 Introduction to Six Sigma (4.00)
  INDU 6341 Advanced Concepts in Quality Improvement (4.00)
‌       

                         
5

credits Elective Courses chosen from:

  ENGR 7011 Graduate Seminar in Mechanical and Industrial Engineering (1.00)

a 1-credit course listed in Topic Area  E09 - Professional Leadership Skills or a GSPD 600-level course;

INDU courses (Topic Area  E12 - Industrial Engineering);

MECH courses;

ENCS courses (Topic Area  E01 - Mathematical Methods)

 

Option III. Supply Chain Engineering (45 credits)

24

credits of Industrial Engineering Core Courses:

 

  INDU 6121 Applied Optimization (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6990 Industrial Engineering Capstone (8.00)
‌ 

             
16

credits Area Courses:

 

  INDU 6141 Logistics Network Models (4.00)
  INDU 6151 Decision Models in Service Sector (4.00)
  INDU 6161 Design and Operations of Supply Chain Networks (4.00)
  INDU 6251 Facilities Planning and Warehouse Operations (4.00)
‌   

             
5

credits Elective Courses chosen from:

  ENGR 7011 Graduate Seminar in Mechanical and Industrial Engineering (1.00)

a 1-credit course listed in Topic Area E09 - Professional Leadership Skills or a GSPD 600-level course;

INDU courses (Topic Area  E12 - Industrial Engineering);

MECH courses;

ENCS courses (Topic Area  E01 - Mathematical Methods) 

Option IV. Industrial Optimization and Systems Analytics (45 credits)

24

credits of Industrial Engineering Core Courses:

 

  INDU 6121 Applied Optimization (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6990 Industrial Engineering Capstone (8.00)
‌ 

           
16

credits Area Courses:

 

  INDU 6111 Theory of Operations Research (4.00)
  INDU 6361 Discrete Optimization (4.00)
  INDU 6371 Stochastic Optimization (4.00)
  INDU 6611 Applied Industrial Systems Analytics (4.00)
‌      

           
5

credits Elective Courses chosen from:

  ENGR 7011 Graduate Seminar in Mechanical and Industrial Engineering (1.00)
  

a 1-credit course listed in Topic Area  E09 - Professional Leadership Skills or a GSPD 600-level course;

INDU courses (Topic Area  E12 - Industrial Engineering);

MECH Courses;

ENCS courses (Topic Area  E01 - Mathematical Methods‌)

Option V. Reliability and Maintenance Engineering (45 credits)

24

credits of Industrial Engineering Core Courses:

 

  INDU 6121 Applied Optimization (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6990 Industrial Engineering Capstone (8.00)
‌ 

         
16

credits Area Courses:

 

  INDU 6351 System Reliability (4.00)
  INDU 6381 Applications of Reliability Engineering (4.00)
  INDU 6391 Reliability and Maintenance for Design and Manufacturing (4.00)
  INDU 6421 Systems Safety Engineering and Management (4.00)
‌     

         
5

credits Elective Courses chosen from:

  ENGR 7011 Graduate Seminar in Mechanical and Industrial Engineering (1.00)
  

a 1-credit course listed in Topic Area  E09 - Professional Leadership Skills or a GSPD 600 level course;

INDU courses (Topic Area  E12 - Industrial Engineering‌);

MECH courses;

ENCS courses (Topic Area  E01 - Mathematical Methods)

Option VI. Industrial Engineering General Stream (45 credits)

24

credits of Industrial Engineering Core Courses:

 

  INDU 6121 Applied Optimization (4.00)
  INDU 6211 Production Systems and Inventory Control (4.00)
  INDU 6310 Applied Probability and Statistics for Engineers (4.00)
  INDU 6311 Discrete System Simulation (4.00)
  INDU 6990 Industrial Engineering Capstone (8.00)
‌ 

             
21

credits Elective Courses chosen from:

  ENGR 7011 Graduate Seminar in Mechanical and Industrial Engineering (1.00)

a 1-credit course listed in Topic Area  E09 - Professional Leadership Skills  or a GSPD 600-level course;

INDU courses (Topic Area  E12 - Industrial Engineering‌)

MECH courses

ENCS courses (Topic Area  E01 - Mathematical Methods)

   

Please apply online. Read the how-to guide for application procedures. 

1. Submit your application and pay a $100 CAD application fee.  A student ID number will be issued

2. You can upload your documents online. You can also upload your documents by logging in to the Student Hub and going to My CU Account

3. A completed file that is ready to be assessed will include:

For initial assessment purposes, scanned and uploaded copies of documents are accepted.  To finalize a file, once admitted, Concordia University will require official documents.

  DEGREE
 
FALL
(September)
WINTER
(January)
SUMMER
(May/June)
Industrial Engineering
Canadian / International /
Permanent Resident
MEng Feb. 1 July 1 Jan. 30
 

Graduate students from the Mechanical, Industrial and Aerospace Engineering Department are invited to apply for Teaching Assistant positions. A minimal mark of A- in the course they are requesting to teach is needed. The priority level when assigning the graduate applicants is: Ph.D., M.A.Sc., and then M.Eng. Priority is to be given to students with good language abilities.

Learn more about Teaching Assistantships

Back to top

© Concordia University