Consult our latest peer-reviewed publications in top scientific journals
Javid, Seyyed Morteza, Christian Moreau, and Javad Mostaghimi. "Numerical Analysis of Buckling of a Single Suspension Droplet." Journal of Thermal Spray Technology 29.3 (2020): 344-357.
Yeganehdoust, Firoozeh, Reza Attarzadeh, Ida Karimfazli, and Ali Dolatabadi. "A numerical analysis of air entrapment during droplet impact on an immiscible liquid film." International Journal of Multiphase Flow 124 (2020): 103175.
Nikonam M., Raheleh, Pugh, Martin D., and Robin AL Drew. "Pore structure, porosity and compressive strength of highly porous reaction-bonded silicon nitride ceramics with various grain morphologies." Journal of Materials Science 55, no. 2 (2020): 509-523.
Elhadi Ibrahim, Mohamed, and Mamoun Medraj. "Water Droplet Erosion of Wind Turbine Blades: Mechanics, Testing, Modeling and Future Perspectives." Materials 13.1 (2020): 157.
Gujba, Abdullahi K., and Mamoun Medraj. "Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties." Advances in Materials Science and Engineering 2020 (2020).
Ashouri, Milad, Benjamin CM Fung, Fariborz Haghighat, and Hiroshi Yoshino. "Systematic approach to provide building occupants with feedback to reduce energy consumption." Energy 194 (2020): 116813.
Abadi, Mostafa Fadaeefath, Fariborz Haghighat, and Fuzhan Nasiri. "Data center maintenance: applications and future research directions." Facilities (2020).
Mamaghani, Alireza Haghighat, Fariborz Haghighat, and Chang-Seo Lee. "Role of titanium dioxide (TiO2) structural design/morphology in photocatalytic air purification." Applied Catalysis B: Environmental 269 (2020): 118735.
Zhou, Yaping, Jiayu Chen, Zhun Jerry Yu, Jun Li, Gongsheng Huang, Fariborz Haghighat, and Guoqiang Zhang. "A novel model based on multi-grained cascade forests with wavelet denoising for indoor occupancy estimation." Building and Environment 167 (2020): 106461.
Panchabikesan, Karthik, Mahmood Mastani Joybari, Fariborz Haghighat, Velraj Ramalingam, and Yulong Ding. "Feasibility study on the year-round operation of PCM based free cooling systems in tropical climatic conditions." Energy 192 (2020): 116695.
Klimeš, Lubomír, Pavel Charvát, Mahmood Mastani Joybari, Martin Zálešák, Fariborz Haghighat, Karthik Panchabikesan, Mohamed El Mankibi, and Yanping Yuan. "Computer modelling and experimental investigation of phase change hysteresis of PCMs: The state-of-the-art review." Applied Energy 263 (2020): 114572.
Malayeri, Mojtaba, Chang-Seo Lee, Fariborz Haghighat, and Lubomir Klimes. "Modeling of gas-phase heterogeneous photocatalytic oxidation reactor in the presence of mass transfer limitation and axial dispersion." Chemical Engineering Journal (2020): 124013.
Dardir, Mohamed, Letizia Roccamena, Mohamed El Mankibi, and Fariborz Haghighat. "Performance analysis of an improved PCM-to-air heat exchanger for building envelope applications–An experimental study." Solar Energy 199 (2020): 704-720.
Vercillo, Vittorio, Simone Tonnicchia, Jean‐Michel Romano, Antonio García‐Girón, Alfredo I. Aguilar‐Morales, Sabri Alamri, Stefan S. Dimov, Tim Kunze, Andrés Fabián Lasagni, and Elmar Bonaccurso. "Design Rules for Laser‐Treated Icephobic Metallic Surfaces for Aeronautic Applications." Advanced Functional Materials 30, no. 16 (2020): 1910268.
Minetto, Robert Alexis Leonczuk, and Marius Paraschivoiu. "Simulation based analysis of morphing blades applied to a vertical axis wind turbine." Energy (2020): 117705.
Shiraz, Maryam Zabarjad, Aierken Dilimulati, and Marius Paraschivoiu. "Wind power potential assessment of roof mounted wind turbines in cities." Sustainable Cities and Society 53 (2020): 101905.
Bakhshi, Nima, and Mehdi Hojjati. "Effect of compaction roller on layup quality and defects formation in automated fiber placement." Journal of Reinforced Plastics and Composites 39, no. 1-2 (2020): 3-20.
Bayatpour, Afshin, and Mehdi Hojjati. "Moisture Effect on Properties of Out-of-Autoclave Laminates with Different Void Content." International Journal of Composite Materials 10, no. 1 (2020): 1-9.
Hegde, Sandesh Rathnavarma, and Mehdi Hojjati. "Performance of composite sandwich structures under thermal cycling." Journal of Composite Materials 54, no. 2 (2020): 271-283.
Riad, Keroles B., Alexandre A. Arnold, Jerome P. Claverie, Suong V. Hoa, and Paula M. Wood-Adams. "Photopolymerization Using Metal Oxide Semiconducting Nanoparticles for Epoxy-Based Coatings and Patterned Films." ACS Applied Nano Materials (2020).
Sharifi, Navid, Ali Dolatabadi, Martin Pugh, and Christian Moreau. "Anti-icing performance and durability of suspension plasma sprayed TiO2 coatings." Cold Regions Science and Technology 159 (2019): 1-12.
Gateman, Samantha Michelle, Ilias Halimi, Alexandre Romão Costa Nascimento, Robert Lacasse, Robert Schulz, Christian Moreau, Richard Chromik, and Janine Mauzeroll. "Using macro and micro electrochemical methods to understand the corrosion behavior of stainless steel thermal spray coatings." npj Materials Degradation 3, no. 1 (2019): 1-9.
Gateman, Samantha Michelle, Kristopher Page, Ilias Halimi, Alexandre Romão Costa Nascimento, Sylvio Savoie, Robert Schulz, Christian Moreau, Ivan P. Parkin, and Janine Mauzeroll. "Corrosion of One-Step Superhydrophobic Stainless-Steel Thermal Spray Coatings." ACS Applied Materials & Interfaces 12, no. 1 (2019): 1523-1532.
Tarasi, Fariba, Elnaz Alebrahim, Ali Dolatabadi, and Christian Moreau. "A comparative study of YSZ suspensions and coatings." Coatings 9, no. 3 (2019): 188.
Caio, Fernanda, and Christian Moreau. "Influence of Substrate Shape and Roughness on Coating Microstructure in Suspension Plasma Spray." Coatings 9, no. 11 (2019): 746.
Alebrahim, Elnaz, Fariba Tarasi, Md Saifur Rahaman, Ali Dolatabadi, and Christian Moreau. "Fabrication of titanium dioxide filtration membrane using suspension plasma spray process." Surface and Coatings Technology 378 (2019): 124927.
Nascimento, Alexandre RC, Samantha Michelle Gateman, Janine Mauzeroll, Sylvio Savoie, Robert Schulz, and Christian Moreau. "Electrochemical Behavior, Microstructure, and Surface Chemistry of Thermal-Sprayed Stainless-Steel Coatings." Coatings 9, no. 12 (2019): 835.
Aghasibeig, Maniya, Fariba Tarasi, Rogerio S. Lima, Ali Dolatabadi, and Christian Moreau. "A Review on Suspension Thermal Spray Patented Technology Evolution." Journal of Thermal Spray Technology (2019): 1-27.
Saleh, Amr, Ghobad Amini, and Ali Dolatabadi. "Measurement of dynamic surface tension of suspension sprays based on oscillating jet technique." Atomization and Sprays 29, no. 1 (2019).
Tembely, Moussa, and Ali Dolatabadi. "A comprehensive model for predicting droplet freezing features on a cold substrate." Journal of Fluid Mechanics 859 (2019): 566-585.
Yeganeh, A. Zabihi, M. Jadidi, C. Moreau, and Ali Dolatabadi. "Numerical modeling of aerosol deposition process." Surface and Coatings Technology 370 (2019): 269-287.
Nikonam M., Raheleh, Pugh, Martin D., and Robin AL Drew. "Formation mechanism of porous reaction-bonded silicon nitride with interconnected pores in the presence of MgO." Journal of the European Ceramic Society 39, no. 4 (2019): 915-927.
Nikonam M., Raheleh, Pugh, Martin D., and Robin AL Drew. "Microstructural evolution mechanism of porous reaction bonded silicon nitride ceramics heat-treated in two powder beds." Ceramics International 45, no. 17 (2019): 21986-21997.
Wang, Jian, Zhang Zhang, Yi-Nan Zhang, Dong Han, Liling Jin, Liyuan Sheng, Patrice Chartrand, and Mamoun Medraj. "Investigation on metallic glass formation in Mg-Zn-Sr ternary system combined with the CALPHAD method." Materials Letters 256 (2019): 126628.
Rajagopal, Rajinikanth, Mahbuboor Rahman Choudhury, Nawrin Anwar, Bernard Goyette, and Md Rahaman. "Influence of Pre-Hydrolysis on Sewage Treatment in an Up-Flow Anaerobic Sludge BLANKET (UASB) Reactor: A Review." Water 11, no. 2 (2019): 372.
Sameti, Mohammad, and Fariborz Haghighat. "Optimization of 4th generation distributed district heating system: Design and planning of combined heat and power." Renewable energy 130 (2019): 371-387.
Mirzaei, Amir, Zhi Chen, Fariborz Haghighat, and Laleh Yerushalmi. "Magnetic fluorinated mesoporous g-C3N4 for photocatalytic degradation of amoxicillin: transformation mechanism and toxicity assessment." Applied Catalysis B: Environmental 242 (2019): 337-348.
Shayegan, Zahra, Fariborz Haghighat, and Chang-Seo Lee. "Photocatalytic oxidation of volatile organic compounds for indoor environment applications: three different scaled setups." Chemical Engineering Journal 357 (2019): 533-546.
Dardir, Mohamed, Karthik Panchabikesan, Fariborz Haghighat, Mohamed El Mankibi, and Yanping Yuan. "Opportunities and challenges of PCM-to-air heat exchangers (PAHXs) for building free cooling applications—A comprehensive review." Journal of Energy Storage 22 (2019): 157-175.
Brochot, Clothilde, Pooya Abdolghader, Fariborz Haghighat, and Ali Bahloul. "Filtration of nanoparticles applied in general ventilation." Science and Technology for the Built Environment 25, no. 2 (2019): 114-127.
Mamaghani, Alireza Haghighat, Fariborz Haghighat, and Chang-Seo Lee. "Hydrothermal/solvothermal synthesis and treatment of TiO2 for photocatalytic degradation of air pollutants: Preparation, characterization, properties, and performance." Chemosphere 219 (2019): 804-825.
Mamaghani, Alireza Haghighat, Fariborz Haghighat, and Chang-Seo Lee. "Photocatalytic oxidation of MEK over hierarchical TiO2 catalysts: Effect of photocatalyst features and operating conditions." Applied Catalysis B: Environmental 251 (2019): 1-16.
Joybari, Mahmood Mastani, Saeid Seddegh, Xiaolin Wang, and Fariborz Haghighat. "Experimental investigation of multiple tube heat transfer enhancement in a vertical cylindrical latent heat thermal energy storage system." Renewable energy 140 (2019): 234-244.
Parsaee, Mojtaba, Mahmood Mastani Joybari, Parham A. Mirzaei, and Fariborz Haghighat. "Urban heat island, urban climate maps and urban development policies and action plans." Environmental technology & innovation (2019): 100341.
Huang, Xiao, Nick Tepylo, Valérie Pommier-Budinger, Marc Budinger, Elmar Bonaccurso, Philippe Villedieu, and Lokman Bennani. "A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications." Progress in Aerospace Sciences 105 (2019): 74-97.
Vercillo, Vittorio, Norbert Karpen, Alexandre Laroche, Javier Alejandro Mayén Guillén, Simone Tonnicchia, Raphael de Andrade Jorge, and Elmar Bonaccurso. "Analysis and modelling of icing of air intake protection grids of aircraft engines." Cold Regions Science and Technology 160 (2019): 265-272.
Zhao, Binyu, Shuang Luo, Elmar Bonaccurso, Günter K. Auernhammer, Xu Deng, Zhigang Li, and Longquan Chen. "Resolving the Apparent Line Tension of Sessile Droplets and Understanding its Sign Change at a Critical Wetting Angle." Physical review letters 123, no. 9 (2019): 094501.
Vercillo, Vittorio, José Tiago Cardoso, Daniel Huerta-Murillo, Simone Tonnicchia, Alexandre Laroche, Javier Alejandro Mayén Guillén, José Luis Ocaña, Andrés Fabián Lasagni, and Elmar Bonaccurso. "Durability of superhydrophobic laser-treated metal surfaces under icing conditions." Materials Letters: X 3 (2019): 100021.
Lima, Rogerio S., Bruno MH Guerreiro, and Maniya Aghasibeig. "Microstructural Characterization and Room-Temperature Erosion Behavior of As-Deposited SPS, EB-PVD and APS YSZ-Based TBCs." Journal of Thermal Spray Technology 28, no. 1-2 (2019): 223-232.
Alidokht, Sima A., Stephen Yue, and Richard R. Chromik. "Effect of WC morphology on dry sliding wear behavior of cold-sprayed Ni-WC composite coatings." Surface and Coatings Technology 357 (2019): 849-863.
Zhang, Yinyin, Sylvie Descartes, and Richard R. Chromik. "Influence of WC on third body behaviour during fretting of cold-sprayed CuMoS2WC composites." Tribology International 134 (2019): 15-25.
Munagala, Venkata Naga Vamsi, Sara I. Imbriglio, and Richard R. Chromik. "The influence of powder properties on the adhesion strength and microstructural evolution of cold sprayed Ti6Al4V single splats." Materials Letters 244 (2019): 58-61.
Zhang, Yinyin, Deep Choudhuri, Thomas W. Scharf, Sylvie Descartes, and Richard R. Chromik. "Tribologically induced nanolaminate in a cold-sprayed WC-reinforced Cu matrix composite: a key to high wear resistance." Materials & Design 182 (2019): 108009.
Munagala, Venkata Naga Vamsi, Tyler B. Torgerson, Thomas W. Scharf, and Richard R. Chromik. "High temperature friction and wear behavior of cold-sprayed Ti6Al4V and Ti6Al4V-TiC composite coatings." Wear 426 (2019): 357-369.
Alidokht, Sima A., Jacques Lengaigne, Jolanta E. Klemberg-Sapieha, Steve Yue, and Richard R. Chromik. "Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior." Journal of Materials Engineering and Performance 28, no. 3 (2019): 1532-1543.
Imbriglio, S. I., V. N. V. Munagala, T. Schmitt, R. Gauvin, J. E. Klemberg-Sapieha, and R. R. Chromik. "Failure dynamics of spherical and irregular shaped Ti splats deposited on sapphire by cold spray." Surface Topography: Metrology and Properties 7, no. 4 (2019): 045002.
Hegde, Sandesh Rathnavarma, and Mehdi Hojjati. "Effect of core and facesheet thickness on mechanical property of composite sandwich structures subjected to thermal fatigue." International Journal of Fatigue 127 (2019): 16-24.
Gupta, Shambhu K., and Mehdi Hojjati. "Thermal cycle effects on laminated composite plates containing voids." Journal of Composite Materials 53, no. 4 (2019): 489-501.
Bakhshi, Nima, and Mehdi Hojjati. "Time-dependent wrinkle formation during tow steering in automated fiber placement." Composites Part B: Engineering 165 (2019): 586-593.
Nakhle, Wissam, Marie-Claude Heuzey, and Paula M. Wood-Adams. "Interdiffusion dynamics at the interface between two polystyrenes with different molecular weight probed by a rheological tool." In AIP Conference Proceedings, vol. 2107, no. 1, p. 040003. AIP Publishing LLC, 2019.
Fotsing, Edith Roland, Ehsan Rezabeigi, Annie Ross, Paula M. Wood-Adams, and Robin AL Drew. "Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion." Journal of Porous Materials 26, no. 6 (2019): 1781-1794.