PUBLICATIONS
Theme 1: Environmental Protection
| Sub-Project | Title/Authors/Reference | Status |
| 1.1.1 | A novel approach to prepare Li-La-Zr-O solid state electrolyte films by suspension plasma spray | Submitted on Dec 31, 2020. Under review |
| Ido Koresh, Zhaolin Tang and Tom Troczynski |
||
| Solid State Ionics |
||
| 1.1.1 | Improving the Rheological and Stability Characteristics of Highly Concentrated Aqueous Yttria Stabilized Zirconia Slurries |
Published |
| Maryam Yaghtin, Amirhossein Yaghtin, Zhaolin Tang, and Tom Troczynski | ||
| Ceram. Int., vol. 46, no. 17, pp. 26991–26999, 2020. |
||
| 1.1.1 | Aging Behavior of Water-based YSZ Suspensions for Plasma Spraying of Thermal Barrier Coatings |
Published |
| Maryam Yaghtin, Amirhossein Yaghtin, Pooria Najafisayar, Zhaolin Tang, and Tom Troczynski | ||
| J. Therm. Spray Technol., p. Available online, 2021 |
||
| 1.1.4 | Time-resolved particle image velocimetry and 3D simulations of single particles in the new conical ICP | Published |
| X. Guo, S Alavi, E Dalir, J Dai, J Mostaghimi | ||
| Journal of Analytical Atomic Spectrometry 34 (3), 469-479 (2019) | ||
| 1.3.3 | Efficient Measurement of the Influence of Chemical Composition on Corrosion Potential: Analysis of an Mg-Al Diffusion Couple Using Scanning Micropipette Contact Method | In Review |
| Samantha Gateman, Nicholas Stefan Georgescu, Min-Kyung Kim, In-Ho Jung, and Janine Mauzeroll | ||
| Journal of the Electrochemical Society, 2019 | ||
| 1.3.3 | Using macro and micro electrochemical methods to understand the corrosion behavior of stainless steel thermal spray coatings | Published |
| Samantha Michelle Gateman, Ilias Halimi, Alexandre Romão Costa Nascimento, Robert Lacasse, Robert Schulz,Christian Moreau, Richard Chromik and Janine Mauzeroll | ||
| npj Mater. Degrad, 2019, 3, 25 | ||
| 1.3.3 | The role of titanium in the initiation of localized corrosion of stainless steel 444 |
Published |
| Samantha Michelle Gateman, Lisa Irene Stephens, Samuel Charles Perry, Robert Lacasse, Robert Schulz and Janine Mauzeroll | ||
| npj Materials Degradation (2018) 5 | ||
| 1.4.1 | Influence of Secondary Component Hardness when Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers |
Accepted |
| Andre C. Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| Journal of Thermal Spray Technology (2021) |
||
| 1.4.1 | Observation of an Indirect Deposition Effect while Cold Spraying Sn-Al Mixed Powders onto Carbon Fiber Reinforced Polymers |
Published |
| Andre C. Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| Journal of Thermal Spray Technology 29 (1), 134-146 (2020) |
||
| 1.4.1 | Cold Spray of Mixed Sn-Zn and Sn-Al Powders on Carbon Fiber Reinforced Polymers |
Published |
| Hanqing Che, André Liberati, Phuong Vo, Stephen Yue |
||
| Materials Science Forum 941, 1892-1897 (2018) |
||
| 1.4.1 | Metallization of Porous Polyethylene Using a Wire-Arc Spray Process for Heat Transfer Applications |
Published |
| S. Devaraj, A. McDonald, S. Chandra | ||
| Journal of Thermal Spray Technology (2021) | ||
| 1.4.1 | Thermal spray deposition of aluminum and zinc coatings on thermoplastics |
Published |
| S. Devaraj, B. Anand, M. Gibbons, A. McDonald, S. Chandra |
||
| Surface & Coatings Technology 399, 126114 (2020) | ||
| 1.4.2 | Development of hybrid metallic coatings on carbon fiber-reinforced polymers (CFRPs) by cold spray deposition of copper-assisted copper electroplating process | Published |
| Panteha Fallah, Sriraman Rajagopalan, André McDonald, Stephen Yue | ||
| Surface and Coatings Technology. 2020 Oct 25;400:126231. |
||
| 1.4.2 | Metallization of Carbon Fiber-reinforced Polymers by a Combined Coating Process: Electroplating and Cold Spray |
Presentation |
| Panteha Fallah, Hanqing Che, André McDonald, Stephen Yue |
||
| Les Rencontres Internationales de la Projection Thermique (RIPT), 9th edition, December 11-13, 2019 (Jülich, Germany), Forschungszentrum Jülich, (2019). |
||
| 1.4.2 | Hybrid metallic coatings on polymer-based composites |
Submitted |
| Panteha Fallah, André McDonald, Stephen Yue |
||
| ITSC, under review |
| Sub-Project | Title/Author/Reference | Status |
| 1.1.1 | Influence of rheological characteristics and stability of water-based YSZ suspensions on the morphology of suspension plasma sprayed thermal barrier coatings |
Submitted |
| Maryam Yaghtin, Amirhossein Yaghtin, Pooria NAjafisayar, Zhaolin Tang, Tom Troczynski |
||
| 1.1.3 | Effect of substrate surface roughness on the tribocorrosion behavior of DLC-based coatings deposited by PECVD |
Presented |
| Fabrice Pougoum, Anna Jedrzejczak, Ludvik Martinu and Jolanta Klemberg-Sapieha | ||
| Society of Vacuum Coaters, Longbeach California, April 29, 2019 | ||
| 1.4.1 | Cold Spraying of Mixed Sn-Al Powders onto Carbon Fibre Reinforced Polymers | Presented |
| Andre Liberati, Hanqing Che, Steve Yue, Phuong Vo | ||
| ITSC 2018 in Orlando, FL, USA (May 2018) | ||
| 1.4.1 | Cold Spray of Mixed Sn-Zn and Sn-Al Powders on Carbon Fiber Reinforced Polymers | Presented |
| Hanqing Che, André Liberati, Phuong Vo, Stephen Yue |
||
| THERMEC'2018 in Paris, France, 8-13 July |
||
| 1.4.1 | Cold Spraying of Mixed Sn-Al Powders onto Carbon Fibre Reinforced Polymers |
Presented – No paper was submitted |
| Andre Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| MS&T 2018 in Columbus, OH, USA, 14-18 October |
||
| 1.4.1 | Effect of Secondary Component Properties when Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers |
To be Presented – Submission in Review |
| Andre C. Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| Proceedings of the ITSC 2021 in Québec City, QC, Canada, 24-28 May |
||
| 1.4.1 | Influence of Secondary Component Hardness when Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers |
To be Presented – No paper was submitted |
| Andre C. Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| Proceedings of the ITSC 2021 in Québec City, QC, Canada, 24-28 May |
||
| 1.4.1 | Observation of a Redeposition Effect while Cold Spraying Sn-Al Mixed Powders onto Carbon Fiber Reinforced Polymers |
Presented |
| Andre Liberati, Hanqing Che, Phuong Vo, Stephen Yue |
||
| Proceedings of the ITSC 2019 in Yokohama, Japan, 26-29 May |
Theme 2: Multi-Functional Coatings
| Sub-Project | Title/Authors/Reference | Status |
| 2.2.1 | Beyond traditional coatings: A review on thermal-sprayed functional and smart coatings | Published |
| Milad Rezvani Rad, D. Tejero-Martin, M. Rezvani Rad, A. McDonald, T. Hussain | ||
| J. Thermal Spray Technol | ||
| 2.2.1 | Mathematical simulation of heating and melting of solid ice in a carbon steel pipe coated with a resistive heating system | Published |
| M. Rezvani Rad, A. McDonald, | ||
| Int. J. Heat Mass Transfer | ||
| 2.3.1 | Highly hydrophobic electrospun reduced graphene oxide/poly(vinylidene fluoride-co-hexafluoropropylene) membranes for use in membrane distillation | Published |
| Chen, T., Soroush, A., Rahaman, M.S | ||
| Industrial & Engineering Chemistry Research, 57(43), (2018) 14535-14543. | ||
| 2.2.4 | Microstructure, Phase and Dielectric Strength of Thermally Sprayed Alumina Layers in Coating–Based Heating Systems |
Published |
| M. Mohammadian Bajgiran, M. Rezvani Rad, A. McDonald, C. Moreau |
||
| International Journal of Applied Ceramic Technology |
||
| 2.2.4 | Fabrication of thermally sprayed coating systems for mitigation of ice accumulation in carbon steel pipes and prevention of pipe bursting |
Published |
| M. Rezvani Rad, M. Mohammadian Bajgiran, C. Moreau, A. McDonald |
||
| Surface and Coatings Technology |
| Sub-Project | Title/Authors/Reference | Status |
| 2.1.2 | Improvement of Photocatalytic Performance of Titania Surface Layers by Different Powders and Coating Methods | Presented |
| Green-SEAM ANM 2019 | ||
| 2.2.1 | An experimental study of the performance of flame-sprayed Ni-based metal matrix composite coatings as resistive heating elements | Presented |
| S. Taghian Dehaghani, A. Dolatabadi, A. McDonald | ||
| International Thermal Spray Conference, May 26-29, 2019 (Yokohama, Japan) 2019 | ||
| 2.2.1 | Techno-economic assessment of coating-based resistive heating systems versus conventional heat tracers | Presented |
| K. Ngaokere, D. Hayden, A. Kumar, A. McDonald | ||
| International Thermal Spray Conference, May 26-29, 2019 (Yokohama, Japan), ASM International, (2019) | ||
| 2.2.1 | An experimental study of the performance of flame-sprayed Ni-based metal matrix composite coatings as resistive heating elements | In Writing |
| Shahed Taghian Dehaghani,A. Dolatabadi, A. McDonald | ||
| International Thermal Spray Conference, May 26-29, 2019 (Yokohama, Japan), ASM International, (2019) | ||
| 2.2.1 | Microstructural and performance analyses of thermal-sprayed electric resistance heating systems deposited onto steel pipes as de-icing elements | Presented |
| M. Mohammadian Bajgiran, C. Moreau, A. McDonald | ||
| International Thermal Spray Conference, May 26-29, 2019 (Yokohama, Japan), ASM International, (2019) | ||
| 2.2.1 | Testing and analysis of freezing phenomenon in conventional carbon steel pipes | Presented |
| Milad Rezvani Rad, R. Marsden, A. McDonald | ||
| Proceedings of the Canadian Society for Mechanical Engineering International Congress 2018 May 27-30, 2018 (Toronto, ON, Canada) |
||
| 2.2.1 | Development of a Thermal-Sprayed Coating System to Mitigate Ice Accumulation and Freezing Damage in Carbon Steel Pipes | Presented |
| Milad Rezvani Rad, A. McDonald | ||
| International Thermal Spray Conference, May 7-10, 2018 (Orlando, FL, USA) | ||
| 2.2.1 | Testing and analysis of freezing and failure in conventional carbon steel pipes | Presented |
| Milad Rezvani Rad, A. McDonald | ||
| International Pressure Equipment Integrity Association, Banff, AB, March 7 – 9, 2018. (Oral) | ||
| 2.2.1 | On Reliability of Thermally-Sprayed Alumina Dielectric Layers in a Multilayered Coating-based Heating System |
Published |
| Milad Rezvani Rad, Morvarid Mohammadian Bajgiran, Christian Moreau Milad Rezvani Rad, André McDonald | ||
| Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 June 2-5, 2019, London, ON, Canada | ||
| 2.2.4 | On Reliability of Thermally-Sprayed Alumina Dielectric Layers in a Multi-layered Coating-based Heating System | Presented |
| Morvarid Mohammadian Bajgiran, Milad Rezvani Rad, André McDonald, Christian Moreau | ||
| Proceedings of the Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019, June 2-5, London, Ontario | ||
| 2.2.4 | Microstructural and performance analyses of thermal-sprayed electric resistance heating systems deposited onto steel pipes as de-icing elements | Presented |
| M. Mohammadian Bajgiran, M. Rezvani Rad, A. McDonald, C. Moreau | ||
| ASM Student Night - Montreal Chapter - March 11, 2019, Montreal, QC, Canada | ||
| 2.3.1 | Electrospun superhydrophobic and amphiphobic nanocomposite membranes with reduced graphene oxide in poly(vinylidene fluoride-co-hexafluoropropylene) for membrane distillation | Presented |
| Chen, T., Ma, W., Anwar, N., Adhikary, S., Rahaman, M.S. | ||
| ACS Spring National Meeting & Exposition, Orlando, FL, March 31 – April 4, 2019. | ||
| 2.3.1 | Highly hydrophobic, electrospun, reduced graphene oxide (rGO)/PVDF-HFP membranes for use in membrane distillation | Presented |
| Chen, T. Ma, W. Anwar, N. Adhikary, S. Rahaman, M.S. |
||
| North American Membrane Society (NAMS) Meeting, June 9-13, 2018, Lexington, KY, USA. | ||
| 2.3.1 | Highly hydrophobic electrospun reduced-graphene oxide/polyvinylidene fluoride-co-hexafluoropropylene membrane for membrane distillation | Presented |
| Chen, T. Soroush, A., Islam, M.S., Ma, W., Rahaman, M.S. | ||
| International Congress for Membrane and Membrane processes (ICOM), July 29 – August 4, 2017, San Francisco, CA USA. | ||
| 2.3.1 | Facile Fabrication of Amphiphobic Nanocomposite Membranes for Application in Membrane Distillation | Presented |
| Chen, T., Yang, L., Rahaman, M.S, | ||
| North American Membrane Society (NAMS) Meeting, May 11-15, 2019, Pittsburgh, PA, USA. | ||
Theme 3: Process Coating Development
| Sub-Project | Title/Authors/Reference | Status |
| 3.1.2 | Modeling of Suspension Plasma Spraying Process Including Arc Movement Inside the Torch |
Published |
| E. Dalir, A. Dolatabadi, and J. Mostaghimi |
||
| Journal of Thermal Spray Technology |
||
| 3.1.2 | Modeling the effect of droplet shape and solid concentration on the suspension plasma spraying |
Published |
| E. Dalir, A. Dolatabadi, and J. Mostaghimi |
||
| International Journal of Heat and Mass Transfer |
||
| 3.1.2 | Investigating the In-flight Droplets' Atomization in Suspension Plasma-Sprayed Coating |
Submitted |
| E. Dalir, A. Dolatabadi, and J. Mostaghimi |
||
| International Journal of Heat and Mass Transfer |
||
| 3.1.4 | From lotus effect to petal effect: tuning the water adhesion of non-wetting rare earth oxide coatings |
Published |
| Pengyun Xu, Thomas Coyle, Larry Pershin, Javad Mostaghimi | ||
| Journal of the European Ceramic Society 40 (2020): 1692-1702 |
||
| 3.1.4 | Control of the hydrophobicity of rare earth oxide coatings deposited by solution precursor plasma spray by hydrocarbon adsorption |
Published |
| Pengyun Xu, Guohui Meng, Larry Pershin, Javad Mostaghimi, Thomas Coyle | ||
| Journal of Materials Science & Technology 62 (2021): 107-118 |
||
| 3.3.1 | Highly porous micro-roughened structures developed on aluminum surface using the jet of rotating arc discharges at atmospheric pressure | Published |
| Siavash Asadollahi, L. Stafford, M. Farzaneh | ||
| J. Appl. Phys. 123 073302 (2018) | ||
| 3.3.1 | Development of organosilicon-based superhydrophobic coating through atmospheric pressure plasma polymerization of HMDSO in nitrogen plasma | Submitted |
| Siavash Asadollahi, M. Farzaneh, L. Stafford | ||
| Applied Surface Science | ||
| 3.3.1 | Icephobic behavior of organosilicon-based surface structures developed through atmospheric pressure plasma deposition in nitrogen plasma | Submitted |
| Siavash Asadollahi, M. Farzaneh, L. Stafford | ||
| Surface Coatings Technology | ||
| 3.3.1 | On the icephobic behavior of organosilicon-based surface structures developed through atmospheric pressure plasma deposition in nitrogen plasma | Submitted |
| S. Asadollahi, M. Farzaneh, L. Stafford | ||
| Surface Coatings Technology (2019) | ||
| 3.3.1 | Multi-pass deposition of organosilicon-based superhydrophobic coatings in atmospheric pressure plasma jets | Submitted |
| S. Asadollahi, J. Profili, M. Farzaneh, L. Stafford, |
| Sub-Project | Title/Authors/Reference | Status |
| 3.1.1 | Evolution of Agglomerate Yttria Stabilized Zirconia Particles During Flight in Suspension Plasma Spray | Presented |
| Seyyed Morteza Javid, Javad Mostaghimi, Christian Moreau | ||
| Proceedings of the ITSC 2019 Yokohama, Japan, 26-29 May | ||
| 3.1.2 | Modeling of Suspension Plasma Spraying Process | Presented |
| Elham Dalir, Javad Mostaghimi, Ali Dolatabadi, | ||
| Proceedings of the ITSC 2019, Yokohama, Japan, 26-29 May | ||
| 3.3.1 | Synthesis of SiOx thin films on glass substrate: a comparison between atmospheric and low-pressure plasma processes | Presented |
| M. Beauchemin, J. Profili, T. Schmitt, N. Naudé, J.E. Klemberg-Sapieha, L. Martinu, L. Stafford | ||
| ISPC, Naples, Italy (2019) | ||
| 3.3.1 | Influence of Sliding Induced Defects on the Frictional Properties of Molybdenum Disulfide (MoS2) | Presented |
| Z. Yang, S. Bhowmick, F. G. Sen, A. T. Alpas | ||
| 45th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, USA. |
Theme 4: Performance Characterization Assessment
| Sub-Project | Title/Authors/Reference | Status |
| 4.1.1 | Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process | Published |
| Pengyun Xu, Thomas W. Coyle, Larry Pershin, Javad Mostaghimi | ||
| Materials & Design 160 (2018): 974-984 | ||
| 4.1.1 | Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray under Atmospheric and Low-pressure Conditions | In Revision |
| Pengyun Xu, Thomas W. Coyle, Larry Pershin, Javad Mostaghimi | ||
| Journal of Thermal Spray Technology 28 (2019) 242-254 | ||
| 4.1.1 | Efficient one-step fabrication of ceramic superhydrophobic coatings by solution precursor plasma spray | Published |
| Pengyun Xu, Larry Pershin, Javad Mostaghimi, Thomas W. Coyle | ||
| Materials Letters 211 (2018): 24-27 | ||
| 4.1.1 | Superhydrophobic ceramic coating: fabrication by solution precursor plasma spray and investigation of wetting behavior | Published |
| Pengyun Xu, Thomas W. Coyle, Larry Pershin, Javad Mostaghimi | ||
| Journal of Colloid and Interface Science 523 (2018): 35-44 | ||
| 4.1.1 | Suspension plasma spray of Yttria stabilized Zrconia coatings | Published |
| Pengyun Xu, J Mostaghimi, TW Coyle, L Pershin | ||
| Ceramic Transactions, Volume CCLXIII V263, pp. 451-464 (2017) | ||
| 4.2.1 | Novel Method for Evaluation of Galling during Piercing Punching of AA5754 Aluminum Sheet | In Writing |
| M.Z.U Khan, S. Bhowmick, M. Lou, A. T. Alpas | ||
| 4.2.2 | Effect of graphene nanoplates dispersed in ethanol on frictional behaviour of tool steel running against uncoated and DLC coated tool steel | Published |
| Sukanta Bhowmick, Z. Yang, A. Banerji, A.T. Alpas | ||
| Tribology Letters 67 (2019) 32. |
| Sub-Project | Title/Authors/Reference | Status |
| 4.1.1 | Fabrication of Superhydrophobic Ceramic Coatings via a Novel Solution Precursor Vacuum Plasma Spray Process | Presented |
| Pengyun Xu, Thomas W. Coyle, Javad Mostaghimi, Larry Pershin | ||
| International Thermal Spray Conference, ISTC2018, 7-10 May 2018, Orlando, Fla | ||
| 4.1.1 | Tailoring the wettability of hydrophobic ceramic coatings fabricated by solution precursor plasma spray process | To Present |
| Pengyun Xu, Thomas W. Coyle, Larry Pershin, Javad Mostaghimi | ||
| the 43rd International Conference and Exposition on Advanced Ceramics and Composites, January 27-February 1, 2019, Daytona Beach, Florida, USA | ||
| 4.1.1 | Solution precursor plasma sprayed yttrium oxide coatings with reversible wettability transition between superhydrophilic and superhydrophobic | Presented |
| Pengyun Xu Thomas W. Coyle, Larry Pershin, Javad Mostaghimi | ||
| International Thermal Spray Conference, May 26-29, 2019 (Yokohama, Japan), ASM International, (2019) | ||
| 4.2.1 | Development of Tribological and Surface Characterization Methods for Evaluation and prevention of Galling of Aluminum Alloy Sheets during Forming Processes | Presented |
| M. Z. U. Khan | ||
| Research seminar at the University of Windsor | ||
| 4.3.1 | Utilization of cold sprayed reactive metal alloys for titanium equipment repair | Presented |
| R.R. Chromik, M. Pearson | ||
| Symposium on Asset Life Extension with Titanium at Managing Aging Plants Conference (13-14 Nov 2018 in Houston, TX, USA) |
Theme 5: Life Cycle Assessment
| Sub-Project | Title/Authors/Reference | Status |
| 5.1.2 |
Investigating the role of surface engineering in mitigating greenhouse gas emissions of energy technologies: An outlook towards 2100 |
Submitted |
| M. Kaddoura, G. Majeau-Bettez, B. Amor, C. Moreau, M. Margni |
||
| Glob. Environ. Chang. (2021) |
| Sub-Project | Title/Authors/Reference | Status |
| 5.1.1 | Improving the recyclability of multi-layered coating systems |
Presented |
| Zeynab Yousefzadeh & Shannon Lloyd |
||
| International Society for Industrial Ecology (ISIE) Americas 2020 Conference, Lima, Peru, July 6-8, 2020 |
||
| 5.1.1 | Using life cycle assessment to identify opportunities for improving the environmental performance in emerging technologies: The case of thermal sprayed coating system for water distribution pipes freeze protection |
Presented |
| Zeynab Yousefzadeh, Milad Rezvani Rad, André McDonald, Shannon Lloyd |
||
4TH SPACE Concordia University and Loyola Sustainability Research Centre Sustainability Across Disciplines Summer Webinar Series, Montreal, Canada, July 14, 2020 (Originally scheduled to be presented at the 4th Annual Concordia Sustainability across Disciplines Conference in Montreal, Canada on March 16-18, which was cancelled due to the COVID-19 pandemic) |
||
| 5.1.2 | Soft-linking LCA and IAM for Prospective Modelling: The Case of Emerging Surface Engineering Technologies in Energy Systems |
Presented |
| M. Kaddoura, G. Majeau-Bettez, B. Amor, M. Margni | ||
| The 76th Life Cycle Assessment Discussion Forum, 19 Nov 2020, ETH Zurich, Switzerland (online) |
